Coversion kit rubber roller ( Info 126-95-E)

For all Frei outside seam coating units, type ORC
 

  Click to enlarge

For ecological reasons water based seam protection coatings
are now being used more frequently than solvent based coatings,
although these can still be used. The water based coating cannot
be applied with a steel roller and therefore a rubber roller should
be used. An advantage of the rubber roller is that it fits with the
external can surfaces.

Scope of delivery:
-  2 rubber rollers (stripe width 10 mm)
-  Eccentric
-  Lacquer transfer roller
-  Wiper
-  Cover
-  Inside part of lacquer roller
-  Clamping rings
-  Installation material

The conversion kit can be ordered under the following ident.-no.:
47741 for ORC/T and ORC/TM (Ident number 21771 and 37463)
46934 for ORC/LTP (Ident number 35553 and 39336)