gas or electric hot-air curing units,
type PCA ( Info 101-94-E)
their existing PCA curing units and to conveniently integrate
a modern, economic can body conveyor system.
Scope of delivery (for U - shape):
- Longitudinal bottom conveyor system with twin belt and
wear resistant steel bands mounted on sturdy, extruded
aluminium sections
- Manual central height adjusting device for fast and easy
conversion to different can diameters
- 180° can body return station including tool set for one
can diameter
- Feeding conveyor
- Run-out conveyor
Technical data:
Can height range:
Production capacity:
55 - 320 mm
40 - 600 cpm
Advantages:
- Minimum spare parts requirements
- Scratch-free conveyance of printed can bodies due to
the use of new steel belt section
- No cooling water circuit required
- Teh system operates without the aid of lateral guide
rails in the heated area
- The previous gas-air mixture preparation system or
electric control system, respectively, remain unchanged
- Existing gas burners or electric hot-air convectors,
respectively, no longer require adjustment following
diameter alterations
- The three previous drive motors for can body conveyors
(feed, delivery and longitudinal) can continue to be used
- The current locations of the welding machines and
elevators in the production lines need not be altered by
the conversion
- Original parts, service and guarantee from the manufacturer
- Simple installation on existing longitudinal beams
